adjusting lpr flush with the lpr body?

[sharpshooter]

Hi i am adjusting my lpr and hear that the best setting is to keep the screw flush with the body and once the gun breaks in you can turn the screw in one turn..but my question is where is the screw considered flush with the body?...with the front face of the screw level with the absolute front face of the lpr body itself?...or the front face of the lpr screw flush with the end of the taper where the threads start?...when i got the gun the face of the lpr was flush at the end of the taper meaning you cant see the threads of the lpr body you could see the complete dish of the inside of the lpr body you know that little taper that starts in from the actual face of the lpr body?

[PEOG]

FLUSH meaning the screw is even with the end of the LPR cap, so that you cant feel a diff when running a finger across the LPR nose

[sharpshooter]

ok cool thanks..then why did both my eteks come with the lpr screw in at the end of the counter sink you know what i mean? the little dish in the hole of the lpr body where the screw inserts basically you could see one of the threads..should i just put the screw flush with the body then as you said and maybe turn the screw in one turn from there?