What brand tank do you use?

[DUFF MUFFIN]

What air tanks do you guys use?

I use crossfire, but I might pick up a ninja tank in the future...

[PEOG]

Ninja...thats it now. Ive sold my DXS, Crossfires, and selling my ANS.

Last weekend I ran mine and a 68/4500 on an ego went through nearly a CASE of paint, with reg set at LP output, 10ms dwell and set to 285 fps

[tblack]

I use a crossfire with a Ninja reg. 68/4500

[DUFF MUFFIN]

Ninja...thats it now. Ive sold my DXS, Crossfires, and selling my ANS.

Last weekend I ran mine and a 68/4500 on an ego went through nearly a CASE of paint, with reg set at LP output, 10ms dwell and set to 285 fps Was it the tank or the person tuning it?

[FurbyTFR]

I used to be sponsored by Centerflag, and I got to try out alot of their new stuff...so I have a production prototype CF 4CE reg that keeps on keeping on...

I dig my CP reg as well, even though the early models have 'issues' with the OOPS. It's since been corrected.

[PEOG]

Was it the tank or the person tuning it?

the tank. the guns set the same all the time, and I would get about 1400-1500 with my ANS, yet nearly 1800 with the ninja

[DriverJ]

I use either a Pure Energy bottle or crossfire bottle with either a CP or a Myth reg.

[HeDsHoTz]

Carleton 68/3k w/Crossfire HP reg because I use it for my A5 as well.

[elimelech12]

have a crossfire 68/45....but i recently fell in love with my ninja 50/45. especially when playing the snake and being nice and tight is necessary.

[Sectionate]

Guerrilla Air 68/45, PE 48/3k and a PE 72/3k

[gpneric]

I have 5 different HPA tanks and honestly it just depends on which one is full at the time.

[Vashthestampede]

Have an ANS 68/45 stubby that is probably going to be getting a myth reg on it soon.

[BadRabbit]

right now im using a 68/45 crossfire and a 68/45 pure energy. Size/weight wise I like the crossfire way better. Its smaller and more compact and seems to weigh less. The Pure energy's resine coating seems alot cheaper too, its already chipped in a tiny spot (the resine, not the carbon fiber). I used epoxy to fill it in though and you can barely even notice it ever happend.

[Ghillie_55]

My main tank is a 70/45 crossfire stubby with a myth reg on it.

I also have a PE 88/45 with a ANS reg on it.

I love my stubby!

[Amanda [Squeegee]]

I will never use anything other than a PMI. The Geurilla Air guys are awesome so, if I weren't a poor baller I'd buy a myth reg.

[RTDawnPatrol]

Pure Energy 68/3k wrap, PE 72/3k steel.

[AL1EN]

I use PE but i would rather have a Guerilla Air.

[PEOG]

I would suggest Ninja over guerilla, cheaper, and better Regs, and the Guerillas are made BY ninja

[cwest]

PE and Ninja for this dude. Both 68/4500.

[shadow51]

NOW:

68/4500 Guerrilla Air w/all black: Myth Regulator. Micro black gauge, Micro black nipple.
Weight empty: 2.12 lbs.

And it is: GUERRILLA not GUERILLA

[Havoc]

Smart parts 45/4500 with a Myth Reg. I love it but I just picked up a 68/4500 MacDev so I'm excited to see how that one does

[TheECP]

Just got a Ninja 68/4500 (Soon to be in my hands)

And also have a PE 68/4500, and a PE 68/3000. For the whole family :)

[GWALTINATOR]

1. PE 68/45
1. PE 88/45

Both w/ HP regs. as I will occasionally use my Tippmann's as well.
My primary is my Etek II though.:D

[Baby Ollie]

DXS 48/45 Stubby. Occasionally I'll use a 45/45 if a teammate or friend wants to borrow the stubby.

[mikkysixx2010]

i use an avi carbon fiber 45/68

[mny_bgz14]

i use a centerflag carbon fiber 68/3000 with the new smartparts 3000psi reg

[shadow51]

68/4500 Guerrilla Air w/all black: Myth Regulator. Micro black gauge, Micro black nipple.
Weight empty: 2.12 lbs.

[Vincent Vega]

I chose Crossfire, but I am looking for a Ninja 50/45

[Small Block]

I've got

2 Smart Parts 68 4500
1 Smart Parts 88 4500
1 Crossfire 45 4500
1 Crossfire 70 4500
1 Carleton 72 4500

I swap back and forth between Myth regs and micro max flos on the 68's. I got the 88 for my Mag, has an adj. inline max-flo. The carleton has a centerflag reg.

lol I think I need to get rid of some bottles.

[JinTae]

I have a DXS 68/4500 tank with a Guerriila Myth Reg on it. Works great for me.

[GWALTINATOR]

Poll updated! :thumbs up: :tongue: :D :rofl:

Just Kidding!!! Never put Co2 in an Ego!!!!!!!

[NrKissed]

I think I have both a Crossfire and Pure Energy 45s, but I use the Crossfire as a primary. My other tank is a 3A but the wife uses it these days (might be a crossfire under the hood too).

Edit: I do infact have a Pure Energy tank as my #2. But I do admit the new Ninja tanks look nice..

[soulcar]

even though I clicked on the wrong one up at the top, I use a Crossfire. I would like to get a Ninja reg on them. I've noticed that those regs seem to use the air more effectively. I have a Crossfire with what I think is a nicked o-ring, so I figure this will be a good time to switch them.

[Myth]

I use dye bottles

[Outlaw]

Mostly I use a Ninja tank & reg, sometimes one of three other tanks with a Ninja reg.

[G-FOURce]

i have a PE 45/45 but i am going to be shipping it out to Ninja for a req swap soon... love that blackout look

[I3oomI3astic]

have the lightest tank ever lol 68/45
http://i904.photobucket.com/albums/ac248/nitro336/btl1.jpg

[JesterTLS]

Who does LCP get to do their tanks??? I like that, custom tanks.


I run a DXS and a Pure Energy

[soulcar]

Who does LCP get to do their tanks??? I like that, custom tanks.


They are made by Ninja. :thumbs up:

[PEOG]

They are made by Ninja. :thumbs up:


Not correct, The tanks are PSI, the same company that makes Ninja, Gurilla, DXS, PE tanks

[soulcar]

Not correct, The tanks are PSI, the same company that makes Ninja, Gurilla, DXS, PE tanks


Sorry my bad, when I saw them at LL2 at CPX under the ninja tent i assumed they were made by Ninja. The old saying is true about assuming! :surrender:

[PEOG]

PSI makes bottles for alot of companies, they decided to sell them themselves under their own label...so PSI created their own company Ninja. PSI and ninja are the same, only Ninja is their own brand, rather then just making bottles for other companies

[PEOG]

I thought ninja made them too, but learned who ninja was

[soulcar]

So......... I was kinda close?

Still dig the tanks no matter who makes them, they represent the "home field".

[C Bomb]

I heard something about Ninja possibly coming out with a 49ci that was a little longer in the bottle then their current 50. I'd give up my pure energy's in a blink if there's truth in that. As it stands, I may still take them up on that Reg Swap / Hydro when my tanks come due next year anyways.

[Marxman]

Ninja...thats it now. Ive sold my DXS, Crossfires, and selling my ANS.

Last weekend I ran mine and a 68/4500 on an ego went through nearly a CASE of paint, with reg set at LP output, 10ms dwell and set to 285 fps

I bought Darth's ANS for 75$

[peady15]

I have 3 Carleton Tanks, 1 68/4500 with a Ninja Reg., 1 68/4500 with a HP Crossfire Reg. and a 88/3000 with a Centerfire Reg. These are not the highest end tanks but they are work well and I never have had any troubles with any of them.

[SoBeJohn]

we're sponsored by Guerrilla Air. the majority of us use them.. completely re buildable valve, we havent had any issues other than dirt issues from a dirty fill. its nice that it can be completely taken apart cleaned and rebuilt..

[deadbodyboy]

using a dye throttle 45/45 soon. just got it and haven't tested it out yet. if it fails i'll stick with my P.E. 45/45.

[NinjaPaintball]

I heard something about Ninja possibly coming out with a 49ci that was a little longer in the bottle then their current 50. I'd give up my pure energy's in a blink if there's truth in that. As it stands, I may still take them up on that Reg Swap / Hydro when my tanks come due next year anyways.

It is true and we just got them in. Check with your local dealer or the website soon.

[Tuflehundon]

I voted other. I use an Evil Scion 88ci/5000psi tank. She's a bit large but I wear it in my vest on my back and run a remote so I don't care. I don't run out of air very often.

[Kanuck]

I've got 4 bottles right now. All with Ninja Regs

Guerrilla Air 68/45
Ninja 68/45
LCP Army 68/45
Carelton 68/45

[Rev.]

Used to have a Crossfire HP 88/4500 but found out they can't be hydro'd in Canada; so I'm now running a Ninja 90/4500; with the reg set at mid-pressure!

[LogitechFan]

Guerrilla 68/4500 with a G2